Setral庐 PRO-setral-KS ECO (Spray) Eco-friendly, biodegradable anticorrosive agent and fine oil Malaysia, Selangor, Kuala Lumpur (KL), Sungai Buloh Supplier, Suppliers, Supply, Supplies

Setral庐 PRO-setral-KS ECO (Spray) Eco-friendly, biodegradable anticorrosive agent and fine oil

Quantity: In Stock

Category: Setral Industrial Universal Cleaner & Degreaser

Quick Overview:

Tag: #Machinery cleaning spray and Industrial cleaner spray #Eco degreaser spray #Industrial maintenance cleaner #Eco-friendly industrial cleaner

Art.Nr. 050526
Application

Excellent for lubricating and making mechanical elements workable as well as for removing and preserving fretting corrosion on metallic surfaces.
For corrosion protection, lubricating, cleaning and making mechanical parts working in all areas of application where there is a risk of release into the environment.
Fine-mechanical drives, measuring tools, sliders, spindles, joints, fittings, chains and ropes, cylinder locks, screw connections, axial face seals etc.

Properties

Biodegradable: > 85% according to OECD 301 B
Raw materials are on the LuSC-list (as of TD creation)
Multifunctional in use
Reduces friction and energy consumption
Optimal temporary corrosion protection of metallic surfaces
Good creeping effect
Excellent lubricating and passable making of mechanical elements
Cleans oil and fat from dirty surfaces
Silicone-free
Does not contain acid and resin
Absorbs water residues
Excellent compatibility with common materials
Best possible combination of cleaning and thin film lubrication
Neutral to most plastics and elastomers

Instructions

Application by spray can or spraying device onto the dry and degreased surface.
Before storage of tools the cooling bores can be flushed and are thus protected from corrosion.
Before flushing with pump systems check compatibility with sealings.
For removal of fretting corrosion, rub in PRO-setral-KS ECO in circular motions with a fiber fleece cloth and wipe off with a cleaning cloth.
The minimum shelf life in original sealed containers, stored in a cool and dry place (no direct sunlight) is about 3 years.
Due to the variety of applications we highly recommend to always carry out corresponding tests prior to general use.

Technical Data
Optics	yellow/orange
Basis	ester
Density, 15°C	0.88 g/cm³	ISO 23581
Viscosity kinematic, 40°C	5.8 mm²/ss	ISO 23581
Flash point, COC	>160 °C	DIN EN ISO 2592
Copper corrosion (3h/100°C)	1	DIN EN ISO 2160
Steel finger test 168h/20°C with salt water	No corrosion	ASTM D 665-B
Four ball weld load	1600 N	DIN 51350-4
Four ball wear test, 400N/1h	0.53 mm	DIN 51350-5
Temperature active ingredient	-10 - 120 °C	In house
Short term max. temperature	150 °C

All information stated is intended to guide preliminary product selection only. The above information is neither an assurance of product properties nor is it a general statement of fitness for use in the listed applications. Please consult with our technical staff about your specific use case and technical parameters.

Sorry, Currently No Video Uploaded.

Sorry, Currently No File Uploaded.