Setral庐 MI-setral-AL/FD-2 Semi-synthetic H1-aluminum complex grease for the food and pharmaceutical industry Malaysia, Selangor, Kuala Lumpur (KL), Sungai Buloh Supplier, Suppliers, Supply, Supplies

Setral庐 MI-setral-AL/FD-2 Semi-synthetic H1-aluminum complex grease for the food and pharmaceutical industry

Quantity: In Stock

Category: Food Grade Air Compressor Oil

Quick Overview:

Tag: #Food processing lubricant #Bearing grease food grade #Industrial food grade grease #NSF H1 food grade grease

Art.Nr. 033072

Application

For the lubrication of machines and facilities in the food and pharmaceutical industry.
Typical applications: Armatures, tap cocks, joints, telescopic slides, packaging, labelling and canning machines in wet atmosphere etc.

Properties

H1 registered
Manufactured in a production facility certified to ISO 21469 hygiene requirements
Kosher certified
Halal certified
TPPT-free formulation for less labeling
Water resistant
Reduces wear and tear
Stable against ageing, no gumming
Good corrosion protection
Compatible with common sealing material

Instructions

Clean and degrease lubrication points carefully prior to application. For this CLEAN-setral-FD is specially suited.
Follow the instructions of the bearing manufacturer.
The minimum shelf life in original sealed containers, stored in a cool and dry place (no direct sunlight) is about 3 years.
Due to the variety of applications we highly recommend to always carry out corresponding tests prior to general use.

Technical Data
Optics	White/Light Beige
Basis	Semi-Synthetic
Thickener	Aluminium Complex Soap
Basic Oil Viscosity kinematic, 40°C	200 mm²/s	ISO 23581
Basic Oil Viscosity kinematic, 100°C	19 mm²/s	ISO 23581
Viscosity index	>100	DIN ISO 2909
Consistency number	2	DIN 51818
Penetration, worked 60 strokes	265-295 1/10mm	DIN ISO 2137
Steel corrosion (EMCOR, dist. Water)	0/0	DIN 51802
Water resistance, static	0 – 90	DIN 51807-1
Four ball weld load	2800 N	DIN 51350-4
Four ball wear test, 1500N/1min	1.4mm	DIN 51350-5
Flow pressure at -30°C (Kestemich)	<1400hPa	DIN 51805

ndm factor deep groove ball bearing	ca. 250000 mm/min	In house
ndm factor taper ball bearing	ca. 150000 mm/min	In house
Temperature range	-25 - +140 °C
Short term max. temperature	+160 °C

All information stated is intended to guide preliminary product selection only. The above information is neither an assurance of product properties nor is it a general statement of fitness for use in the listed applications. Please consult with our technical staff about your specific use case and technical parameters.

Sorry, Currently No Video Uploaded.

Sorry, Currently No File Uploaded.