Setral庐 COVA-setral-SHF 68 FD 鈥 High Temperature Fully Synthetic Chain Oil | Food Grade (NSF H1) Malaysia, Selangor, Kuala Lumpur (KL), Sungai Buloh Supplier, Suppliers, Supply, Supplies

Setral庐 COVA-setral-SHF 68 FD 鈥 High Temperature Fully Synthetic Chain Oil | Food Grade (NSF H1)

Quantity: In Stock

Category: SYNTHETIC LUBRICANT

Quick Overview:

Tag: #Halal Certified Lubricant #Food grade high temperature oil #NSF H1 high temperature oil #Synthetic high temperature oil #High temperature lubricant for food processing machinery

Application

Especially developed for the application in screw compressors.
Mainly for applications that are highly demanding for the lubricant.
Especially suited for the application in the food and pharmaceutical industry.

Properties

H1 registered
Manufactured in a production facility certified to ISO 21469 hygiene requirements
Without MOSH/MOAH as a formulation component according to EFSA definition and JRC-TR for EU 2017/84
Kosher certified
Halal certified
TPPT-free formulation for less labeling
Minimal oil vapor contamination of the compressed air
Typically extends the life of filters and separator system
Modern additives for ideal wear protection
High oxidation stability
Compatible with common plastics, elastomers and paints
Extended oil change intervals compared to mineral and white oil
Free of genetically modified ingredients
Miscible with standard mineral oils

Instructions

Follow the instructions of the compressor and vacuum pump manufacturer.
Do not mix with lubricants on polyglycole base.
The minimum shelf life in original sealed containers, stored in a cool and dry place (no direct sunlight) is about 5 years.
Due to the variety of applications we highly recommend to always carry out corresponding tests prior to general use.

Technical Data
Optics	Yellow
Basis	PAO
Density, 15°C	0.85 g/cm2	ISO 23581
Viscosity kinematic, 40°C	69 mm2/s	ISO 23581
Viscosity kinematic, 100°C	10 mm2/s	ISO 23581
Viscosity index	154	DIN ISO 2909
Flash point, COC	+236 °C	DIN EN ISO 2592
Pour point	-50°C	DIN ISO 3016
Copper corrosion (24^th/100°C)	1	DIN EN ISO 2160
Steel corrosion	Passed	DIN ISO 7120
Four ball weld load	2000 N	DIN 51350-4
Four ball wear test, 400N/1h	0.34 mm	DIN 51350-5
Temperature range	-40 - +140 °C
Short tem max. temperature	150 °C

All information stated is intended to guide preliminary product selection only. The above information is neither an assurance of product properties nor is it a general statement of fitness for use in the listed applications. Please consult with our technical staff about your specific use case and technical parameters.

Sorry, Currently No Video Uploaded.

Sorry, Currently No File Uploaded.