Removal of all common paints incl. 2K, epoxy, EC and powder coatings. Removal of sealing residues on screw joints, lids, flanges and engine blocks.
Removal of diesel effect, plastic and paint residues on metallic surfaces of tools and moulds in injection moulding machines, extrusion and film lines.
Properties
Clean application
Evaporates slowly and almost without residues
Ideal remover of sealings
Removes even hardest paints
Solves brownish diesel residues
Applicable also with galvanized material, aluminium and aluminium alloys
Economical in consumption
Instructions
Spray generously on the parts to be treated.
Attention: dissolves elastomers, plastics, paints and sealings. If required, carry out precaution measures on the machines (e.g. painted parts, hydraulic hoses etc.).
If parts are heavily soiled, repeat the cleaning process.
Cleaning time depends primarily on the grade of contamination of the parts.
Subsequent cleaning with CLEAN-AN/U is recommended.
The minimum shelf life in original sealed containers, stored in a cool and dry place (no direct sunlight) is about 2 years.
Due to the variety of applications, we highly recommend to always carry out corresponding tests prior to general use.
Technical Data
Optics
Colourless
Basis
Different solvents
Density, 20°C
0.75 g/cm³
EN ISO 3675
Flash point, COC
<-20 °C
DIN EN ISO 2592
Temperature range
-10 - +40 °C
All information stated is intended to guide preliminary product selection only. The above information is neither an assurance of product properties nor is it a general statement of fitness for use in the listed applications. Please consult with our technical staff about your specific use case and technical parameters.
Minta maaf, tiada video.
Minta maaf, tiada fail.
Setral庐 CLEAN-setral-EDK (Spray) - Cavity cleaner and cold paint stripper
Kalau ada penyataan,Sila menghubungi kita. Kita akan menjawab anda secepat mungkin.😳
