For temporary and long-term preservation of injection moulds and tools, as well as exterior and interior preservation of aggregates, machine parts and other metallic surfaces.
Properties
Excellent long-term corrosion protection
Greenish film for visualisation on blank metal
Forms a soft, greasy corrosion protection film after solvent evaporation
Highly efficient even at razor-thin application
Compatible with mineral oil based lubricants
Resistant to seawater
Extremely water repellent
Usually removed completely from injection moulding tools after a few shots
Silicone-free
Economical in consumption
Instructions
Application by spray can or spraying device onto the dry and degreased surface.
Shake well prior to use (spray).
Apply product thin and evenly.
Short drying time at room temperature.
Thicker layer thickness increases the corrosion protection.
Allow solvents to evaporate completely before storage.
The minimum shelf life in original sealed containers, stored in a cool and dry place (no direct sunlight) is about 3 years.
Due to the variety of applications we highly recommend to always carry out corresponding tests prior to general use.
Technical Data
Optics
greenish-transparent
Basis
synthetic wax in solvents
Density, 15°C
0.79 g/cm³
ISO 23581
Corrosion test, Kesternich
31 rounds
DIN ISO 6270-2AHT
Corrosion test, 100h/50°C
0 - no corrosion
DIN 51359
VbF
A I
In house
Drying time, 20°C
30 - 60 min
In house
Temperature range
-30 - +80 °C
All information stated is intended to guide preliminary product selection only. The above information is neither an assurance of product properties nor is it a general statement of fitness for use in the listed applications. Please consult with our technical staff about your specific use case and technical parameters.
Minta maaf, tiada video.
Minta maaf, tiada fail.
Setral庐 PRO-setral-ACS (Spray) Wax-like corrosion protection for metal surfaces
Kalau ada penyataan,Sila menghubungi kita. Kita akan menjawab anda secepat mungkin.😳
