Fully synthetic cleaning dilution especially developed for screw compressors. Also suited for other oil-bearing circulating systems like gears, hydraulic systems etc.
Properties
Dissolves varnish-like deposits and carbonized residues
Enables cleaning without downtime or disassembling of the operating unit
Neutral behavior with common cloggings at a max. concentration of 10% in the oil
Enables extended oil change intervals or better efficiency
Instructions
Miscible with oils on base of mineral oil, synthetic hydro carbons, ester and non-watermiscible polyalkylene glycol.
Consider the viscosity and wear protection of loaded operating units.
For cleaning displace 10% of the used oil in the system with CLEAN-setral-COVA. Drain the oil DIRECTLY after approx. 50 operating hours at an ideal oil temperature of 70-80°C and clean or better replace the filter.
For ideal life-time of the new oil a residue-free cleaning of all pipes and corners is inevitable.
The minimum shelf life in original sealed containers, stored in a cool and dry place (no direct sunlight) is about 5 years.
Due to the variety of applications we highly recommend to always carry out corresponding tests prior to general use.
Technical Data
Optics
Yellow
Density, 15°C
0.93 g/cm3
ISO 23581
Viscosity kinematic, 40°C
ca. 35 mm2/s
ISO 23581
Flash point, COC
180°C
DIN EN ISO 2592
Temperature range
-30 - +160 °C
All information stated is intended to guide preliminary product selection only. The above information is neither an assurance of product properties nor is it a general statement of fitness for use in the listed applications. Please consult with our technical staff about your specific use case and technical parameters.
Minta maaf, tiada video.
Minta maaf, tiada fail.
Setral庐 CLEAN-setral-COVA - Fully Synthetic, especially developed for screw compressors - Industrial Cleaning Agent for Chains & Mechanical Components
Kalau ada penyataan,Sila menghubungi kita. Kita akan menjawab anda secepat mungkin.😳
