Especially designed for sliding surfaces in injection moulding tools like ejector pins or guide ways particularly for production of plastic parts and plastic packaging for food and pharmaceutical industry.
Also suitable for rolling and plain bearings, joints and other sliding pairings in machinery and equipment in the food industry working under high temperatures and high loads.
Properties
H1 registered
Kosher certified
Halal certified
Tested for sterility (aerobic mesophilic bacteria, yeast and mold) by a microbiology laboratory
TPPT-free formulation for less labeling
Prevents microbial growth thanks to special formulation
Resistant to cold and hot water, alkaline solutions etc.
Very high wear and corrosion protection, high load carrying ability
Environmentally friendly; no labelling according to the ordinance on hazardous substances (GefStoffV)
Compatible with usual plastic and sealing materials
High adherence on metallic surfaces
Silicone-free
Free from animal ingredients
Free from allergens
Instructions
Clean and degrease lubrication points carefully prior to application. For this CLEAN-setral-FD is specially suited.
Follow the instructions of the bearing manufacturer.
The minimum shelf life in original sealed containers, stored in a cool and dry place (no direct sunlight) is about 3 years.
Due to the variety of applications we highly recommend to always carry out corresponding tests prior to general use.
Technical Data
Optics
Light Beige
Basis
Semi-Synthetic
Thickener
Calcium Sulfonate Complex
Viscosity kinematic, 40°C
ca. 100 mm2/s
ISO 23581
Viscosity kinematic, 100°C
ca. 13 mm2/s
ISO 23581
Viscosity index
>100
DIN ISO 2909
Consistency number
2
DIN 51818
Penetration,worked 60 strokes
265-295 1/10mm
DIN ISO 2137
Dropping point
>280 °C
ISO 2176
Copper corrosion,24h/100°C
1
DIN 51811
Steel corrosion (EMCOR, dist. Water)
0/0
DIN 51802
Water resistance, dynamic
1-80
DIN 51807-2
Water resistance, static
0 – 90
DIN 51807-1
Four ball weld load
>4500 N
DIN 51350-4
Ndm factor deep groove ball bearing
500000 mm/min
In house
Ndm factor taper ball bearing
250000 mm/min
In house
Temperature range
-25 - +160 °C
Short term max. temperature
+180 °C
All information stated is intended to guide preliminary product selection only. The above information is neither an assurance of product properties nor is it a general statement of fitness for use in the listed applications. Please consult with our technical staff about your specific use case and technical parameters.
Minta maaf, tiada video.
Minta maaf, tiada fail.
Setral庐 SYN-setral-CA/C2 FD 鈥揤ersatile and media-resistant H1 high-temperature grease with high wear and corrosion protection
Kalau ada penyataan,Sila menghubungi kita. Kita akan menjawab anda secepat mungkin.😳
